View AD6C101_1037220.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AD6C101
1 Form A Solid State Relay DESCRIPTION
The AD6C101 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. With a high blocking voltage (600V), it is designed to replace electromechanical relays in high voltage switching applications. The relay consists of an integrated circuit that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly inductive loads.
FEATURES
APPLICATIONS
* * * * *
High Blocking Voltage (600V) High Input-Output Isolation (3750V) 120mA MAX Continuous Load Current On Resistance 40 ohms MAX Long Life/High Reliability
* * * * *
Reed relay replacement Meter reading systems Medical equipment Battery monitoring Multiplexers
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
PARAMETER Storage Temperature Operating Temperature Continuous Input Current Transient Input Current Reverse Input Control Voltage Output Power Dissipation UNIT C C mA mA V mW 6 600 MIN -55 -40 TYP MAX 125 85 50 400
* * *
-H -S -TR
High Input-to-Output Isolation Surface Mount Leadform Option Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on device for part number identification.
SCHEMATIC DIAGRAM
*The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability.
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 1 of 5
AD6C101 rev 1.40 (10/25/2004)
AD6C101
1 Form A Solid State Relay
ELECTRICAL CHARACTERISTICS - 25C
PARAMETER INPUT SPECIFICATIONS
LED Forward Voltage LED Reverse Voltage Turn-On Current Turn-Off Current V V mA mA 0.2 1.8 0.5 1.75 5 2 If = 10mA Ir = 10uA Io = 120mA
UNIT
MIN
TYP
MAX
TEST CONDITIONS
OUTPUT SPECIFICATIONS
Blocking Voltage Continuous Load Current On-Resistance Leakage Current Output Capacitance Offset Voltage V mA A pF mV 6 0.2 30 0.2 600 120 40 1 Io = 1uA If = 5mA Io = 120mA Vo = 600V If = 0, f = 1.0MHz If = 5mA
COUPLED SPECIFICATIONS
Isolation Voltage -H Suffix Turn-On Time Turn-Off Time Isolation Resistance Coupled Capacitance Contact Transient Ratio V V ms ms G pF V/ s 2000 100 3 7000 dV = 50V 2500 3750 1 0.5 5 2 T = 1 minute T = 1 minute If = 5mA, Io = 120mA
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 2 of 5
AD6C101 rev 1.40 (10/25/2004)
AD6C101
1 Form A Solid State Relay
PERFORMANCE DATA
AD6C101 Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25C
AD6C101 Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25C
40 Device Count 30 20 10 0 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 Turn-On Tim e (m s)
40 Device Count 30 20 10 0 0.04 0.05 0.05 0.05 0.05 0.06 0.06 0.06 Turn-Off Tim e (m s)
AD6C101 Typical On-Resistance Distribution N = 100, Ambient Temperature = 25C
AD6C101 Typical Leakage Current Distribution N = 100, Ambient Temperature = 25C
40 Device Count Device Count 27 28 29 30 31 32 33 34 30 20 10 0 On-Resistance (ohm s)
50 40 30 20 10 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 Leakage Current (uA)
AD6C101 Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25C
AD6C101 Maximum Load Current vs. Temperature
40 30 20 10 0 600 610 620 630 640 650 660 670 Blocking Voltage (V)
Load Current (mA)
50 Device Count
150 100 50 0
20 40 60 -4 0 -2 0 80 0
Tem perature (C)
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 3 of 5
AD6C101 rev 1.40 (10/25/2004)
AD6C101
1 Form A Solid State Relay
MECHANICAL DIMENSIONS 6 PIN DUAL IN-LINE PACKAGE 6 PIN SURFACE MOUNT DEVICE
END VIEW
END VIEW
TOP VIEW
TOP VIEW
BOTTOM VIEW/ BOARD PATTERN
BOTTOM VIEW/ BOARD PATTERN
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 4 of 5
AD6C101 rev 1.40 (10/25/2004)
AD6C101
1 Form A Solid State Relay
DISCLAIMER
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use.
LIFE SUPPORT POLICY
SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness.
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 5 of 5
AD6C101 rev 1.40 (10/25/2004)

▲Up To Search▲

Price & Availability of AD6C101

	To Download AD6C101 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .